The steel platform is a kind of loft-style shelf. It is similar to a building on a building. Through the steel structure, a space is divided into several layers of space above and below to expand the utilization rate of the space. After a week of overtime work, the Shanghai steel platform construction expansion project was finally completed perfectly today. It is supported by some columns, and its space is open. It can be used at will according to actual needs, as long as some columns are avoided.

The way the steel platform was transported to Shanghai this time: In order to facilitate installation and transportation, we will divide the floor of the steel platform into sections. Because the one-piece floor is very flat, its connection is also very flat. If the floor is not well connected due to factors such as the ground, we will use floor strips to prevent the protruding part from causing people to trip.

Mezzanine steel platform
 

Our project this time is a steel platform. We designed the floor into a galvanized floor. It is directly rolled into shape using galvanized steel plates, and does not require surface treatment methods such as spraying, so its cost is relatively lower. Compared with spraying floors, galvanized floors have slightly worse corrosion resistance, so they can be used in some non-special environments, and they are conductive and more suitable for electronics factories to improve the anti-static performance of warehouses.

Shanghai steel platform manufacturer
 

The galvanized floor steel platform consists of columns, beams, floor slabs, as well as floor slabs, guardrails and other parts. The number of stairs is determined by actual use. Sometimes, in order to improve work efficiency, we can also design lifting platforms or slides to carry out cargo turnover between different levels, and we can also reserve forklift operation ports to use forklifts to operate upper cargo.

When the height of the steel platform is too high, such as 4 meters, the length of the stairs needs to be lengthened to ensure that the slope is not too steep. In this way, we usually divide the stairs into several sections and add a corner platform. The platform can also allow operators to temporarily rest and place the goods in their hands. In our case, the height is only a little more than 2 meters, and the stairs are not divided into sections.

Shanghai Customized Steel Platform First Choice Huifeng Intelligent Shelf Manufacturer, focusing on shelf production and research and development for 20 years, with good product quality, good cost performance, and gold medal after-sales service to make customers buy with confidence and use with peace of mind.